With the PrintStar transfer press, T-shirts, jackets, sleeves, trouser legs, bags, etc. can be professionally printed.

However, the decisive advantage of this transfer press is that it opens automatically after the time has elapsed.

  • Interchangeable worktops
  • Low space requirement
  • Large opening angle
  • Opens automatically
Made in Germany

Details

Modular design:

Thanks to a quick-change device, the worktops can be exchanged in just a few seconds without any tools at all. Because the worktops are free-standing, the textiles can be easily pulled on, so that only the cut-out to be printed lies on it. This results in the following advantages:

  • Transfer prints on the reverse side are protected
  • no pressure wrinkles
  • Prints don't go through

In addition to the standard worktop sizes, we also manufacture custom sizes!

Electrics and display:

The temperature and time can be set and read easily, quickly and uncomplicatedly on our clear display

Heating plate:

Fast heating as well as an even and constant temperature is guaranteed thanks to the latest Mikanit heating foil technology. Our heating plates, which we manufacture ourselves, are supplied with a Teflon cover as standard, which is fastened with a clamping device and can be replaced by the customer himself at any time.

In addition to the standard heating plates, we also manufacture custom sizes!

Consumables

The Teflon protection for the heating ensures, as the name suggests, that the heating plate is protected against dirt such as glue residues or paint. In addition, the Teflon is very easy to clean or, in the worst case, can simply be replaced by a new one.

A Nomex nettle cover protects the worktop or silicone rubber. The cover also ensures that the textiles slide better over the worktop when pulled on. It can be washed or also replaced.

The silicone rubber on the worktop contributes significantly to the printing result. Due to the meanwhile very varied printing possibilities you get different results with hard or softer silicone rubber layers. As we do not glue our pads to the worktops, the silicone rubber can also be exchanged for another at any time. A medium-hard one is delivered as standard. However, you can also order a soft and a hard silicone rubber from us.

How it works

When the transfer press is closed, a magnet is activated which keeps the machine closed until the set time has elapsed. The magnet is then automatically deactivated and the transfer press opens automatically. The pressing process can also be interrupted before the time has elapsed by pressing a pushbutton. The pressure can be adjusted via an easily accessible knurled screw.

Technical data

Usessuitable for all transfer applications
DesignFolding press
Drivesemi-automatic
Heating plate formats in cm45x35 / 50x40
Temperature settingdigital 0-230C°
Time settingdigital 0-999sec.
Contact pressureapprox. 0.5 kg/cm2 depending on panel size
Weightapprox. 60 kg
Dimensions (WxDxH) in cm75x50x70
Power / Connection230V / 10A / 2200W
Scope of deliveryTeflon cover, Nomex nettle protective cover, silicone rubber
OtherQuick-change system for various worktops, Mikanit surface heating
Removable discs in cm15x15 / 20x20 / 30x15 / short sleeves 12x20 / long sleeves 35x10 / 30x20 / 30x35 / 35x45 / 50x40 / 35x45 Polo / 35x45 jackets / (other sizes on request)
 


Non-binding inquiry for 
PrintStar

Price list desired
I have read the data protection regulations. *


*=Required field


Manufacturer for transfer presses

Benefit from manufacturer prices.

The Fuchs satisfaction guarantee

Without ifs and buts on every fox transfer press.

Made in Germany

Each transfer press is made by hand.

PDF catalogue

Here you can download our current PDF catalogue:

PDF Download